Lanco Pipes & Fittings are a reputed fabricator, supplier, and stockist of Stainless Steel 310/310S Sheets, Plates and Coils in Quezon, Philippines. Stainless Steel 310/310S is a mildly austenitic heat-resistant alloy with commendable oxidation resistance up to 2000°F. Its powerful chromium and nickel content provides comparable erosion resistance, superior resistance to corrosion, and a higher percentage of room temperature strength retention than common austenitic alloys like Type 304. With remarkable durability to -450 degrees F and low magnetic permeability, UNS S31008 Stainless Steel Polish Sheets are commonly used at remotely low temperature.
ASTM A240 SS 310S Slitting Coil have properties such as oxidation resistance to 2000 degree F, moderate tolerance at rising temperatures, resistance to hot corrosion, strength, and toughness at low elevation, etc.. Standard commercial strategy can smoothly fabricate Grade 310/310S. Stainless steels is harder than carbon steels and prefer to work harden immediately. All general welding techniques can be used to weld Grade 310/310S. Radiant tubes, annealing covers, tube hangers for petroleum refinery steam boilers, and system parts of coal gasifiers are some of the popular uses of SS 1.4841 Coils.
The stainless steel grade 310S is toughened at 1038-1121°C (1900-2050°F), and then dipped in water. Heat treatment has no effect on 310S stainless steel. Cold working will enhance the durability and hardness of this alloy. Wet corrosive environment are not suitable for Stainless Steel 310 Plates. Aqueous oxidation resistance is damaged by the high carbon substance, which is available to upgrade creep characteristics. After prolonged exposure to elevated temperatures, the alloy is sensitive to intergranular oxidation.
SS 1.4841 Sheets are used in various implementations such as in general Radiant tubes, tube hangers for petroleum refining and steam boilers, coal gasifier internal parts, lead pots, thermowells, refractory anchor bolts, burners, and combustion chambers, muffles, annealing covers, food manufacturing systems, and cryogenic formation, etc.
Lanco Pipes & Tubes provides its products and services to the clients in the market at reasonable and economic prices. Quality products are what Lanco Pipes & Fittings deal in. They also provide door-step services of their products in desired materials and packages.
Standard : ASTM / ASME A240 / SA240
Size : 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm
Thickness : 0.1mm to 12 mm Thk
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange)
Finish : Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Hardness : Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
|SS 310||1.4841||S31000||SUS 310||310S24||20Ch25N20S2||-||X15CrNi25-20|
|SS 310S||1.4845||S31008||SUS 310S||310S16||20Ch23N18||-||X8CrNi25-21|
|Element||SS 310||SS 310S|
|C||0.015 max||0.08 max|
|Mn||2.0 max||2 max|
|Si||0.15 max||1 max|
|P||0.020 max||0.045 max|
|S||0.015 max||0.030 max|
|Cr||24.00 - 26.00||24 - 26|
|Ni||19.00 - 21.00||19 - 21|
|Mo||0.10 max||0.75 max|
|Fe||54.7 min||53.095 min|
|Melting Point||1402 °C (2555 °F)|
|Tensile Strength||Psi – 75000 , MPa – 515|
|Yield Strength (0.2%Offset)||Psi – 30000 , MPa – 205|